Table of Contents
Advertisement
Table 106 Advanced Application > Multicast > IPv6 Multicast > MLD Snooping-proxy > VLAN
LABEL
Last Member
Query Interval
Downstream
Query Interval
Maximum
Response Delay
Add
Cancel
Clear
Index
VID
Delete
Cancel
23.4.3 MLD Snooping-proxy VLAN Port Role Setting
Click the Port Role Setting link in the Advanced Application > Multicast > IPv6 Multicast >
MLD Snooping-proxy > VLAN screen to display the screen as shown. See
227
for more information on multicasting.
Chapter 23 Multicast
DESCRIPTION
Enter the amount of time (in miliseconds) between the MLD group-specific queries sent
by an upstream port when an MLD Done message is received. This value should be
exactly the same as what's configured in the connected multicast router.
This value is used to calculate the amount of time an MLD snooping membership entry
(learned only on the upstream port) can remain in the forwarding table after a Done
message is received.
When an MLD Done message is received, the Switch sets the entry's lifetime to be the
product of Last Member Query Interval and Robustness Variable.
Enter the amount of time (in miliseconds) between general query messages sent by the
downstream port.
Enter the maximum time (in miliseconds) that the Switch waits for a response to a
general query message sent by the downstream port.
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel
to save your changes to the non-volatile memory when you are done configuring.
Click Cancel to reset the fields to your previous configuration.
Click Clear to reset the fields to the factory defaults.
This is the index number of the MLD snooping-proxy VLAN entry in the table. Click on an
index number to view more details or change the settings.
This field displays the ID number of the VLAN group.
Select an entry's check box to select a specific entry. Otherwise, select the check box in
the table heading row to select all entries.
Click Delete to remove the selected entry(ies) permanently.
Click Cancel to clear the check boxes.
GS3700/XGS3700 Series User's Guide
239
Section 23.1 on page
Advertisement
Table of Contents
