Table of Contents
Advertisement
Figure 38 Basic Setting > PoE Setup (Stacking mode)
The following table describes the labels in this screen.
Table 19 Basic Setting > PoE Setup
LABEL
DESCRIPTION
PoE Status
PoE Mode
This field displays the power management mode used by the Switch, whether it is in
Classification or Consumption mode.
Total Power (W)
This field displays the total power the Switch can provide to the connected PoE-enabled
devices on the PoE ports.
Consuming Power
This field displays the total amount of power the Switch is currently supplying to the
(W)
connected PoE-enabled devices.
Allocated Power (W)
This field displays the total amount of power the Switch has reserved for PoE after
negotiating with the connected PoE device(s).
Consuming Power (W) can be less than or equal but not more than the Allocated
Power (W).
Remaining Power
This field displays the amount of power the Switch can still provide for PoE.
(W)
Note: The Switch must have at least 16 W of remaining power in order to supply power
Port (Standalone
This is the port index number.
and stacking mode)
State
This field shows which ports can receive power from the Switch. You can set this in the
Basic Setting > PoE Setup screen.
•
•
Chapter 6 Basic Setting
to a PoE device, even if the PoE device needs less than 16 W.
Disable - The PD connected to this port cannot get power.
Enable - The PD connected to this port can receive power.
GS3700/XGS3700 Series User's Guide
74
Advertisement
Table of Contents
