Table of Contents
Advertisement
In the click the Stacking Default button to clear all Switch configuration information you
1
configured and return to the stacking defaults.
Click OK to reset all Switch configurations to the stacking defaults.
2
Figure 345 Load Stacking Default: Start
In the web configurator, click the Save button in the top of the screen to make the changes take
3
effect. If you want to access the Switch web configurator again, you may need to change the IP
address of your computer to be in the same subnet as that of the default Switch IP address
(192.168.1.1).
47.7.2 Load Factory Default
Follow the steps below to reset the Switch back to the factory defaults.
In the click the Factory Default button to clear all Switch configuration information you configured
1
and return to the factory defaults.
Click OK to reset all Switch configurations to the factory defaults.
2
Figure 346 Load Factory Default: Start
In the web configurator, click the Save button in the top of the screen to make the changes take
3
effect. If you want to access the Switch web configurator again, you may need to change the IP
address of your computer to be in the same subnet as that of the default Switch IP address
(192.168.1.1).
47.8 Tech-Support
The Tech-Support feature is a log enhancement tool that logs useful information such as CPU
utilization history, memory and Mbuf (Memory Buffer) log and crash reports for issue analysis by
customer support should you have difficulty with your Switch. The Tech Support menu eases your
effort in obtaining reports and it is also available in CLI command by typing "Show tech-support"
command.
Click Menu > Management > Maintenance > Tech-Support to see the following screen.
Chapter 47 Maintenance
GS3700/XGS3700 Series User's Guide
453
Advertisement
Table of Contents
