8.1.5
Activating diagnostics via the control
The converter provides the functionality to transmit fault and alarm messages (diagnostic
messages) to the control according to the PROFIdrive error classes.
The functionality must be selected in the control (see example ofHotspot-Text (Page 325)
STEP 7) and activated by a ramp-up.
You can output the messages directly on an HMI panel via the control.
SINAMICS G120C frequency converter
Operating Instructions, 03/2012, FW V4.5, A5E02999804B AB
Configuring the fieldbus
8.1 Communication via PROFINET
89