Printing Continues After Media Roll Empties; Removing Jammed Media - Epson SureColor F9470H User Manual

Related references
Media Setup Menu Settings

Printing Continues After Media Roll Empties

If printing does not stop when the media roll ends, make sure the Media End Check setting is set to On.
For best results, leave this setting turned on.
Parent topic:
Related references
Printer Setup Menu Settings

Removing Jammed Media

If media jams in the printer, check the following:
• Make sure the media is not curled, creased, or folded on the leading edge. Do not use media in poor
condition.
• Check the media specifications to make sure you can use the media with your printer and your RIP
software. Check the RIP software manufacturers media guidelines.
• Set the Media Suction setting to a lower value on the product control panel.
Follow the steps here if media becomes jammed in the product.
1. Open the front cover.
2. Turn off the product.
Note: If you see a message on the product control panel and the product will not turn off, unplug the
power cable.
Solving Printing Problems
164