Autocutting and Buzzer Setting after Printing
Whether autocutting is performed and whether the buzzer beeps after printing can be set in
[Post-printing Operation Settings] in the [General] tab of the printer driver.
(For how to display the printer driver, see
[Post-printing Operation Settings] includes the following settings.
• Autocut:
• Completion Beeper Settings: Only After Last Page
72
"How to Use the Printer Driver" on page
After Every Page/Only After Last Page
The printer feeds paper to the position where autocutting can
be performed, and stops after autocutting.
The buzzer beeps after printing is completed.
66.)