Figure 4-28 Attach Base Plate To Base Tube; Figure 4-29 Drive The Stakes A Distance Equal To The Mast Height From The Center Of The Mast - Will Burt EXPEDITION RANGER MAST Operator's Manual

™ M
R O
ANGER AST PERATOR
Set Aside the Base Tube
24. So that the base tube does not get confused with the other mast tubes, it is best to place
the plate on the base tube now. The base tube has the rounded plate adapter at the
bottom. Locate the base tube and place a base plate on the bottom. Set this tube off to
the side, it will be installed last.
Stake the Guy Lines
25. Align the guy stakes to coincide with the four holes on the guy collar on the top of the
mast (not required to align for the swivel collar since it automatically adjusts to the
stakes). Place the stakes 90° apart.
26. If possible, drive the stakes a distance equal to the mast height from the center of the
mast.
Guy Distance = Mast Height

Figure 4-29 Drive the Stakes a Distance Equal to the Mast Height from the Center of the Mast

4-14
'
M
S ANUAL
Base Tube

Figure 4-28 Attach Base Plate to Base Tube

Rounded Plate
Adapter
Guy Distance (x2)
TP-4549901-G
February 2024