Figure 4-20 Pin Arm In Place; Figure 4-21 Pin Payload Adaptor In Place - Will Burt EXPEDITION RANGER MAST Operator's Manual

™ M
R O
ANGER AST PERATOR
10. Pick an angle for the arm, line up the arm hole with the arm collar hole, and pin the arm
in place by pressing the pin button.
Pick an Angle
11. Pick an angle for the payload adaptor, line up the arm hole with adapter hole, and pin
the arm in place by pressing the pin button.
Pick an Angle
12. Connect the payload to the payload adapters. The payload weights (maximum of 40 lb. /
18.1 kg) should be distributed on multiple collar arms as much as possible. The
maximum allowable weight per arm is 20 lb. / 9 kg. For payload weights and wind sail
areas outside website specified limits, contact The Will-Burt Company.
13. Repeat Steps 10, 11, and 12 to add additional collar arms.
4-10
'
M
S ANUAL
Line up Arm

Figure 4-20 Pin Arm in Place

Line up Arm

Figure 4-21 Pin Payload Adaptor in Place

Pin
Pin
TP-4549901-G
February 2024