4.6.1 Manual Deployment
To deploy the mast manually:
4.6.1.1 Install the Top of the Mast
Insert the Top Tube
1. Stand in the operator's quadrant. This area is next to the winch holder and in front of one
of the levels. Lock the upper clamp. See Section 7.5 to check that the clamp is
sufficiently tight. Unlock the lower clamp.
Winch
Holder
Operator's Quadrant
Figure 4-13 Lock the Upper Clamp and Unlock the Lower Clamp
2. Retrieve the top tube (no tapered end (Section 2.3)) from the tube bag. Insert the top
tube from the top of the tripod. Ensure that the white knob, upper clamp, and lower
clamp are in a straight line. See Section 7.5 to check that the clamps are sufficiently
tight.
TP-4549901-G
February 2024
Lock
Insert Top Tube
Figure 4-14 Insert Top Tube from the Top of the Tripod
™ M
R
O
ANGER
AST
PERATOR
Unlock
'
M
S
ANUAL
White Knob
Upper Clamp
Lower Clamp
4-7