Section 6 Transportation; General Transportation; Shipping - Will Burt EXPEDITION RANGER MAST Operator's Manual

Section 6
Before transporting the mast system, the mast system needs to be secured. The exact
procedures for transportation will vary based on the mast system configuration. The process
described in this manual represents a possible method of transporting the mast. Depending on
the environment and equipment available, other methods may work better. Use the best and
safest method for your circumstances.

6.1 General Transportation

To prepare the mast system for transportation:
1. Ensure the mast and components are fully and properly disassembled and placed into
the appropriate storage bags such as the wheeled bag and accessories bag (Section 5).
Do not transport the mast system with the mast and payload extended. Always visually
confirm the mast is fully disassembled before moving the mast.
2. If possible, secure the payload.
3. If necessary, secure the optional EZ Raze™.
4. If necessary, secure any additional components in the mast system.
Note: The operator should always visually confirm the mast is entirely disassembled and
properly stored before moving the mast for transport.

6.2 Shipping

When shipping the mast system, The Will-Burt Company recommends shipping the mast in the
original shipping container shrink-wrapped to a pallet. If the original shipping container is not
available, contact The Will-Burt Company to order a replacement.
When shipping:
1. Prepare the mast system for transportation (Section 6.1).
2. Secure the mast system in the shipping container and shrink-wrap the shipping
container to the pallet:
a. Carefully position the mast and additional components in the shipping container.
b. Secure the lid on the shipping container.
c. Shrink-wrap the shipping container to the pallet.
TP-4549901-G
February 2024
Transportation
™ M
R O
ANGER AST PERATOR
'
M
S ANUAL
6-1