Raise The Mast; Figure 4-63 Attach Base Plate To Winch Tube; Figure 4-64 Drive The Stakes A Distance Equal To The Mast Height From The Center Of The Mast - Will Burt EXPEDITION RANGER MAST Operator's Manual

™ M
R O
ANGER AST PERATOR

4.6.2.3 Raise the Mast

Set Aside the Winch Tube
17. So that the winch tube does not get confused with the other mast tubes, it is best to
place the plate on the winch tube now. The winch tube has the rounded plate adapter at
the bottom. Locate the winch and place a base plate on the bottom. Set this tube off to
the side, it will be installed last.
Stake the Guy Lines
43. Align the guy stakes to coincide with the four holes on the guy collar on the top of the
mast (not required to align for the swivel collar since it automatically adjusts to the
stakes). Place the stakes 90° apart.
44. If possible, drive the stakes a distance equal to the mast height from the center of the
mast.
Guy Distance = Mast Height

Figure 4-64 Drive the Stakes a Distance Equal to the Mast Height from the Center of the Mast

4-26
'
M
S ANUAL
Winch Bottom

Figure 4-63 Attach Base Plate to Winch Tube

Rounded Plate
Adapter
Guy Distance (x2)
TP-4549901-G
February 2024