™ M
R
O
ANGER
AST
PERATOR
Install Tip Tube
5. Retrieve the tip tube from the tube bag. The tip tube is the tube has an integrated pulley
and guy collar. Insert the tip tube from the top of the tripod with the white button in the
notch of the top tube. Ensure that the white knob, upper clamp, and lower clamp are in a
straight line.
Figure 4-42 Tip Tube
6. Ensure that the assembly eyelet is on the backside of the mast. Ensure that the tripod
platform stub goes between the edges of the carriage.
Eyelet
Figure 4-44 Ensure the Eyelet is on the Backside of the
Mast
4-20
'
M
S
ANUAL
Figure 4-45 Ensure the Platform Stub Goes Between
Figure 4-43 Insert Tip Tube
Platform Stub
the Edges of the Carriage
TP-4549901-G
February 2024