Table of Contents
Advertisement
Section 2
Thank you for selecting The Will-Burt Company for your critical payload elevation needs. These
operating instructions describe transporting, handling, installing, disassembling, maintaining and
storing procedures for the Ranger™ Mast. These procedures assume the use of standard mast
systems. Procedures and characteristics for mast systems customized to meet customer-
specific needs may vary.
These operating instructions are intended for professionals who are qualified by their
appropriate training and experience to perform the procedures. Review this document in its
entirety. Contact The Will-Burt Company with any questions before performing any procedure
outlined in this manual.
The views depicted in this manual are provided for clarification and are subject to change
without notice. Views are not to scale.
The Ranger™ Mast is a man-portable, field-erected mast designed for ease of use while
delivering payload deployment flexibility and rugged reliability. The Ranger™ Mast is a fast and
easy solution for elevating a variety of payloads, including lighting, cameras and antennas. The
masts are lightweight and can be manually transported and deployed by one, two, or three
people. The Ranger™ Mast is available in 2 in / 50.8 mm diameter and maximum height of 60 ft
/ 18.3 m. The following models are covered in these operating instructions:
•
Ranger™ Mast
•
Ranger™ Mast with the EZ Raze™ option
See www.willburt.com for information on these and other The Will-Burt Company products.
The Ranger™ Mast is available with many options installed by The Will-Burt Company, such as
different payload adaptors. By adding accessories, the mast can be configured with 2, 3, or 4
arms in 6, 12, 24, or 36 in (15, 30, 60 cm or 1 m) lengths. If using the mast with the EZ Raze™
option, the mast can be configured with 2, 3, or 4 arms in 24 in to 48 in (61 cm to 122 cm)
lengths.
TP-4549901-G
February 2024
Introduction
™ M
R
O
ANGER
AST
PERATOR
'
M
S
ANUAL
2-1
Advertisement
Table of Contents
