Figure 4-54 Connect Cable To The Carriage; Figure 4-55 Feed Through Pulley; Figure 4-56 Connect To Eyelet - Will Burt EXPEDITION RANGER MAST Operator's Manual

Connect the Carriage
12. Take more slack from the winch cable to allow for feeding the cable through the tip tube.
13. Connect the cable to the carriage by pushing the snap hook on the winch cable through
the hole in the tripod collar. Feed the cable through the pigtails of the carriage. Then
feed the snap hook through the top tube.
Tripod
Collar
14. Feed the snap hook through the top pulley and down to the carriage eyelet and snap into
place.

Figure 4-55 Feed Through Pulley

TP-4549901-G
February 2024

Figure 4-54 Connect Cable to the Carriage

™ M
R O
ANGER AST PERATOR
Pigtail

Figure 4-56 Connect to Eyelet

'
M
S ANUAL
4-23