Section 1 Introduction; Safety Precautions; Manual Organization; Additional Documentation - Will Burt Position It RACK MOUNT CONTROLLER Operator's Manual

Section 1
Review this manual in its entirety. Contact the Will-Burt Company with any questions before
performing any procedure outlined in this manual.
The PositionIt Rack Mount Controller (P/N: 5340101) is designed to both control and power the
PositionIt positioners. The Rack Mount Controller also offers the ability to integrate other
controllers such as the default remote joystick controller (P/N: 5098901) or a closed contact
controller.
The PositionIt Rack Mount Controller is designed to work with the:

PositionIt PI-150

PositionIt PI-75

PositionIt PI-35

1.1 Safety Precautions

Refer to the Safety Summary for precautions to be observed while operating or servicing this
equipment.

1.2 Manual Organization

This manual is organized into the following sections:

Section 1 Introduction

Section 2 Installation
Section 3 Operation

1.3 Additional Documentation

In addition to this manual (TP-5362301), see the operator's manual for the appropriate
positioner as follows:

PositionIt PI-150 (P/N: 5061001) and PI-75 (P/N: 5191201) Operator's Manual (TP-
5129001)

PositionIt PI-35 (P/N: 5467801) Operator's Manual (TP-5406201)
If necessary, contact The Will-Burt Company to obtain the operator's manual. During installation
and operation, be sure to follow all appropriate precautions from the operator's manual.
TP-5362301-B
July 2017
Introduction
P I R M
OSITION T ACK OUNT
C
ONTROLLER
1-1