Table of Contents
Advertisement
Label Distribution Protocol
5.12.2.4
fec-egress-stats
Syntax
fec-egress-stats ip-prefix/mask [interval seconds] [repeat repeat] [absolute | rate]
Context
monitor>router>ldp
Description
This command displays egress statistics for LDP FEC prefixes at the configured interval until
the configured count is reached.
Monitor commands are similar to show commands, but only statistical information is
displayed. Monitor commands display the selected statistics according to the configured
number of times at the interval specified.
Parameters
ip-prefix[/mask] — the IP prefix and prefix length associated with the prefix FEC
seconds — specifies the interval for each display, in seconds
repeat — specifies how many times the command is repeated
absolute — displays raw statistics, without processing. No calculations are performed
rate — displays the rate per second for each statistic instead of the delta
Output
The following output is an example of statistics for an LDP FEC instance.
540
Monitor Commands
Values
ipv4-prefix:
ipv4-prefix-length: 32
ipv6-prefix:
ipv6-prefix-length: 128
Values
3 to 60
Default
10
Values
1 to 999
Default
10
on the delta or rate statistics.
Use subject to Terms available at: www.nokia.com
a.b.c.d
x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x - [0 to FFFF]H
d - [0 to 255]D
© 2022 Nokia.
MPLS Guide
3HE 18686 AAAB TQZZA
Advertisement
Table of Contents
