Table of Contents
Advertisement
MPLS Guide
Table 46
session
Syntax
session [ip-addr [:label-space]] local-addresses [sent | recv] ip-addr ip-address
session [ip-addr [:label-space]] [session-type] [state state] [detail | summary]
session [ip-addr [:label-space]] local-addresses [sent | recv] [family]
session [ip-addr [:label-space]] statistics [packet-type] [session-type]
session statistics [packet-type] [session-type] [family]
session [session-type] [state state] [detail | summary] [family]
Context
show>router>ldp
Description
This command displays configuration information about LDP sessions.
Parameters
ip-addr — specifies the IP address of the LDP peer
label-space — specifies the label space identifier that the router is advertising on the
detail — displays detailed information
summary — displays summary information
ip-address — specifies the IP address
state — specifies the current operational state of the adjacency
packet-type — specifies the packet type
3HE 18686 AAAB TQZZA
LDP Parameters Field Descriptions (Continued)
Label
Hello Factor
Passive Mode
Targeted Sessions
interface
Values
0 to 65535
Values
established, trying, down
Values
hello, keepalive, init, label, notification, address
Use subject to Terms available at: www.nokia.com
Description
The value by which the hello timeout should be divided to give the
hello time; that is, the time interval, in seconds, between LDP
Hello messages. LDP uses hello messages to discover neighbors
and to detect loss of connectivity with its neighbors.
Disable — indicates that no authentication is being used
True — indicates that LDP responds only when it gets a connect
request from a peer and will not attempt to actively connect to its
neighbors
False — indicates that LDP actively tries to connect to its peers
Enabled — indicates that targeted sessions are enabled
Disabled — indicates that targeted sessions are disabled
© 2022 Nokia.
Label Distribution Protocol
493
Advertisement
Table of Contents
