Table of Contents
Advertisement
MPLS Guide
3.24.2.4
label
Syntax
label start-label [end-label | [in-use | label-owner]]
Context
show>router>mpls-labels
Description
This command displays MPLS labels exchanged by signaling protocols.
Parameters
start-label — specifies the label value assigned at the ingress router
end-label — specifies the label value assigned for the egress router
in-use — specifies the number of in-use labels displayed
label-owner — specifies the owner of the label
Output
The following output is an example of MPLS label information, and
fields.
Output Example
ALU-12# show router mpls-labels label 32
================================================================
MPLS Label 32
================================================================
Label
----------------------------------------------------------------
32
----------------------------------------------------------------
In-use labels in entire range
================================================================
ALU-12#
*A:Sar18 Dut-B>show>router>mpls-labels># label 32 131071 ildp
=================================================================
MPLS Labels from 32 to 131071 (Owner: ILDP)
=================================================================
Label
-----------------------------------------------------------------
131070
131071
-----------------------------------------------------------------
In-use labels (Owner: ILDP) in specified range
In-use labels (Owner: All) in specified range
In-use labels in entire range
=================================================================
3HE 18686 AAAB TQZZA
Show Commands (MPLS-Labels)
Values
32 to 131071
Values
32 to 131071
Values
bgp, evpn, ildp, mirror, rsvp, static, sr, svcmgr, tldp, vprn
Label Type
static-lsp
Label Type
dynamic
dynamic
Use subject to Terms available at: www.nokia.com
Label Owner
Not-in-use
: 7
Label Owner
ILDP
ILDP
© 2022 Nokia.
MPLS and RSVP-TE
Table 22
: 2
: 2
: 2
describes the
271
Advertisement
Table of Contents
