Table of Contents
Advertisement
MPLS Guide
Table 10
interface
Syntax
interface [ip-int-name | ip-address] [label-map [label]]
interface [ip-int-name | ip-address] statistics
Context
show>router>mpls
Description
This command displays MPLS interface information.
Parameters
ip-int-name — identifies the network IP interface. The interface name cannot be in the
ip-address — specifies the system or network interface IP address
label-map label — specifies the MPLS label on which to match
statistics — displays IP address and the number of packets and octets sent and
Output
The following output is an example of MPLS interface information, and
the fields.
Output Example
ALU-12# show router mpls interface
===============================================================================
MPLS Interfaces
===============================================================================
Interface
-------------------------------------------------------------------------------
system
ip-10.10.1.2
ip-10.10.4.2
ip-10.10.3.2
-------------------------------------------------------------------------------
3HE 18686 AAAB TQZZA
Router MPLS Bypass-Tunnel Field Descriptions (Continued)
Label
Type
form of an IP address. Allowed values are any string up to 32 characters long
composed of printable, 7-bit ASCII characters. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double
quotes.
Values
32 to 1023
received on an interface basis
Admin Groups
Srlg Groups
Admin Groups
Srlg Groups
Admin Groups
Srlg Groups
Admin Groups
Srlg Groups
Use subject to Terms available at: www.nokia.com
Description
The type of protected LSP
Port-id
vport-1
None
None
1/1/1
None
None
1/1/2
None
None
1/1/3
None
None
© 2022 Nokia.
MPLS and RSVP-TE
Table 11
Adm
Opr
Up
Up
Up
Up
Up
Up
Up
Up
describes
TE-metric
None
None
None
None
235
Advertisement
Table of Contents
