Table of Contents
Advertisement
MPLS Guide
The system generates an SNMP trap if BFD fails on an LSP, regardless of whether a failure
action is configured.
The no form of the command removes the configuration.
Default
no failure-action
Parameters
failover-or-down — the active path of an SR-TE LSP switches to the secondary or next-
wait-for-up-timer
Syntax
wait-for-up-timer seconds
no wait-for-up-timer
Context
config>router>mpls>lsp>bfd
config>router>mpls>lsp>primary>bfd
config>router>mpls>lsp>secondary>bfd
Description
This command configures the time to wait for BFD to come up on a path. This timer applies
to SR-TE LSPs. The timer is started when BFD is first enabled on a path or BFD transitions
from up to down. If the timer expires before BFD comes up, the path is torn down and the
retry timer is started.
The wait-for-up-timer command is only available if the configured failure action is failover-
or-down.
The no form of the command resets the timer to the default value.
Default
4
Parameters
seconds — the time to wait for BFD to come up
bgp-transport-tunnel
Syntax
bgp-transport-tunnel {include | exclude}
Context
config>router>mpls>lsp
config>router>mpls>lsp-template
Description
This command allows an RSVP-TE LSP to be used as a transport LSP for BGP tunnel routes
or blocks it from being used.
Default
include
3HE 18686 AAAB TQZZA
preferred available secondary path, or the LSP goes operationally down if no other
path is available
Values
0 to 60
Use subject to Terms available at: www.nokia.com
© 2022 Nokia.
MPLS and RSVP-TE
187
Advertisement
Table of Contents
