Table of Contents
Advertisement
MPLS Guide
retry-timer
Syntax
retry-timer seconds
no retry-timer
Context
config>router>mpls>lsp
config>router>mpls>lsp-template
Description
This command configures the time, in seconds, between LSP re-establishment attempts after
the LSP has failed.
The no form of this command reverts to the default value.
Default
30
Parameters
seconds — specifies the amount of time, in seconds, between attempts to re-establish
rsvp-resv-style
Syntax
rsvp-resv-style [se | ff]
Context
config>router>mpls>lsp
Description
This command specifies the RSVP-TE reservation style, shared explicit (se) or fixed filter (ff).
A reservation style is a set of control options that specify a number of supported parameters.
The style information is part of the LSP configuration.
Default
se
Parameters
ff — fixed filter is single reservation with an explicit scope. This reservation style
se — shared explicit is shared reservation with a limited scope. This reservation style
shutdown
Syntax
[no] shutdown
Context
config>router>mpls>lsp
3HE 18686 AAAB TQZZA
the LSP after it has failed
Values
1 to 600
specifies an explicit list of senders and a distinct reservation for each of them. A
specific reservation request is created for data packets from a particular sender. The
reservation scope is determined by an explicit list of senders.
specifies a shared reservation environment with an explicit reservation scope. This
reservation style creates a single reservation over a link that is shared by an explicit
list of senders. Because each sender is explicitly listed in the RESV message,
different labels can be assigned to different sender-receiver pairs, thereby creating
separate LSPs.
Use subject to Terms available at: www.nokia.com
© 2022 Nokia.
MPLS and RSVP-TE
203
Advertisement
Table of Contents
