Table of Contents
Advertisement
Label Distribution Protocol
Table 50
508
LDP Bindings Field Descriptions (Continued)
Label
P2MP-Id
RootAddr
Interface
EgrNH
Source
Group
InnerRootAddr
No. of VC Labels
No. of Service Bindings
Vc-switching
Egr. Flags
Egr. Ctl Word
Egr. Status Bits
Egr If Name
Ing. Flags
Ing. Ctl Word
Ing. Status Bits
Metric
Mtu
Op
Use subject to Terms available at: www.nokia.com
Description
The Internal identifier of Point to Multi-point LSP
The Root Address (only IPV4)
The Logical Interface ID
The egress next-hop address
The Source Address
The Multicast Group address
The Inner Root Address
The total number of VC labels
The total number of service bindings
Not applicable – always indicates No
Specifies the egress flags, if any
Indicates whether egress control words are used
Indicates whether egress status bits are supported
The egress interface name
Specifies the ingress flags, if any
Indicates whether ingress control words are used
Indicates whether ingress status bits are supported
The metric of the LSP
The size of the MTU for the global FEC or tunnel to which the
LDP binding is applied
The operation performed on the ingress or egress label in the
LDP stack (push or pop)
© 2022 Nokia.
MPLS Guide
3HE 18686 AAAB TQZZA
Advertisement
Table of Contents
