Sr-Te Support - Nokia 7705 SAR-W Series Manual

MPLS and RSVP-TE

3.12.1 SR-TE Support

The following MPLS commands and modes are supported:
The following MPLS commands and modes are not supported:
The user can associate an empty path or a path with strict or loose explicit hops with
the primary paths of the SR-TE LSP using the hop, primary, and secondary CLI
commands.
90
• global [router] MPLS-level commands and modes:
interface, lsp, path, shutdown
• LSP-level commands and modes:
bfd, bgp-transport-tunnel, exclude, hop-limit, include, metric, primary,
retry-limit, retry-timer, shutdown, to, from, vprn-auto-bind
• primary path-level commands and modes:
bandwidth, bfd, exclude, hop-limit, include, shutdown
• secondary path-level commands and modes:
bandwidth, bfd, exclude, hop-limit, include, path-preference, shutdown,
standby
• global MPLS-level commands and modes not applicable to SR-TE LSPs
(configuration is ignored):
admin-group-frr, auto-lsp, bypass-resignal-timer, cspf-on-loose-hop,
dynamic-bypass, frr-object, hold-timer, least-fill-min-thd, least-fill-
reoptim-thd, logger-event-bundling, lsp-template, srlg-frr, static-lsp,
static-lsp-fast-retry
• LSP-level commands and modes not supported with SR-TE LSPs (configuration
is blocked):
adaptive, adspec, fast-reroute, least-fill, propagate-admin-group,
rsvp-resv-style
• LSP-level commands and modes not supported with SR-TE LSPs (configuration
is ignored):
cspf, igp-shortcut
• primary path-level commands and modes not supported with SR-TE LSPs
(configuration is blocked):
adaptive, record, record-label
• secondary path-level commands and modes not supported with SR-TE LSPs
(configuration is blocked):
adaptive, record, record-label
Use subject to Terms available at: www.nokia.com
© 2022 Nokia.
MPLS Guide
3HE 18686 AAAB TQZZA