Table of Contents
Advertisement
MPLS and RSVP-TE
lsp
Syntax
lsp [lsp-name] [status {up | down}] [from ip-address | to ip-address] [detail] [auto-lsp {all |
lsp {transit | terminate} [status {up | down}] [from ip-address | to ip-address | lsp-name
lsp count
lsp [lsp-name] activepath [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp [lsp-name] path [path-name] [status {up | down}] [detail] [auto-lsp {all | mesh-p2p |
lsp [lsp-name] path [path-name] mbb [auto-lsp {all | mesh-p2p | one-hop-p2p}]
Context
show>router>mpls
Description
This command displays LSP details.
Parameters
lsp-name — specifies the name of the LSP used in the path
status up — displays an LSP that is operationally up
status down — displays an LSP that is operationally down
from ip-address — displays the IP address of the ingress router for the LSP
to ip-address — displays the IP address of the egress router for the LSP
transit — displays the LSPs that transit the router
terminate — displays the LSPs that terminate at the router
name — displays the IP address of the named LSP
count — displays the total number of LSPs
activepath — displays the present path being used to forward traffic
path-name — specifies the name of the path carrying the LSP
mbb — displays make-before-break (MBB) information
detail — displays detailed information
auto-lsp {all | mesh-p2p | one-hop-p2p} — specifies the type of auto LSP or all auto
Output
The following outputs are examples of MPLS LSP information:
238
mesh-p2p | one-hop-p2p}]
name] [detail]
one-hop-p2p}]
LSPs
• MPLS LSP
(Output
Example,
• MPLS LSP Detail
(Output
• MPLS LSP Path Detail
• MPLS LSP Path MBB
• MPLS Auto LSP
(Output
Use subject to Terms available at: www.nokia.com
Table
12)
Example,
Table
13)
(Output
Example,
Table
(Output
Example,
Table
Example,
Table
16)
© 2022 Nokia.
14)
15)
3HE 18686 AAAB TQZZA
MPLS Guide
Advertisement
Table of Contents
