Nokia 7705 SAR-W Series Manual page 221

MPLS Guide
Default n/a
implicit-null-label
Syntax [no] implicit-null-label
Context config>router>rsvp
Description This command enables the implicit null label to be included in RESV messages sent by the
egress LER (eLER) to the previous-hop LSR. The implicit null label is enabled for all LSPs for
which the router is the eLER.
When the implicit null label is signaled to the LSR, it pops the outer label before sending the
MPLS packet to the eLER; this is known as penultimate hop popping.
RSVP-TE must be shut down before this command can be used.
The no form of this command disables the signaling of the implicit null label.
Default no implicit-null-label
keep-multiplier
Syntax [no] keep-multiplier number
no keep-multiplier
Context config>router>rsvp
Description This command is used by RSVP-TE to declare that a reservation is down or the neighbor is
down. The keep-multiplier number is used with the refresh-time command to determine
when RSVP-TE will declare the session down.
The no form of this command reverts to the default value.
Default 3
Parameters number — specifies the keep-multiplier value
node-id-in-rro
Syntax node-id-in-rro {include | exclude}
Context config>router>rsvp
3HE 18686 AAAB TQZZA
Values 1 to 255
Use subject to Terms available at: www.nokia.com
© 2022 Nokia.
MPLS and RSVP-TE
221