Table of Contents
Advertisement
MPLS and RSVP-TE
Output Example
*A:ALU-12>show>router>rsvp# neighbor
===============================================================================
RSVP Neighbors
===============================================================================
Legend :
===============================================================================
Neighbor
===============================================================================
10.20.1.2
10.20.1.3
-------------------------------------------------------------------------------
Neighbors : 2
===============================================================================
Table 28
session
Syntax
session [session-type] [from ip-address | to ip-address | lsp-name name] [status {up |
Context
show>router>rsvp
Description
This command shows RSVP-TE session information.
Parameters
session-type — specifies the session type
from ip-address — specifies the IP address of the originating router
to ip-address — specifies the IP address of the egress router
name — specifies the name of the LSP used in the path
status up — specifies to display a session that is operationally up
282
LR - Local Refresh Reduction
LD - Local Reliable Delivery
Interface
ip-10.10.1.1
ip-10.10.2.1
Router RSVP-TE Neighbor Field Descriptions
Label
Neighbor
Interface
Hello
Last Oper Change
Flags
down}] [detail]
Values
originate, transit, terminate, detour, detour-transit, detour-terminate,
bypass-tunnel, manual-bypass
Use subject to Terms available at: www.nokia.com
RR - Remote Refresh Reduction
RM - Remote Node supports Message ID
Description
The IP address of the RSVP-TE neighbor
The interface ID of the RSVP-TE neighbor
The status of the Hello message
The time of the last operational change to the connection
Any flags associated with the connection to the neighbor
© 2022 Nokia.
Hello
Last Oper
Flags
Change
N/A
0d 00:00:44
N/A
0d 00:00:44
3HE 18686 AAAB TQZZA
MPLS Guide
Advertisement
Table of Contents
