Replacement Parts And Wearing Parts - Beurer IH 24 Kids Instructions For Use Manual

Drying
• Place the individual parts on a clean, dry
and absorbent surface and leave them to dry
completely (at least 4 hours).
Durability of materials
• As with any plastic parts, atomisers and
replacement sets are affected by a certain
amount of wear and tear when used and
hygienically prepared on a frequent basis.
Over time, this can lead to a change in the
aerosol, which can have a negative effect on
the efficiency of the treatment. We therefore
recommend that you replace the atomiser and
any replacement set after a year.
• The following point should be observed when
selecting the cleaning product or disinfectant:
only use a mild cleaning product or
disinfectant in the concentration and volume
prescribed by the manufacturer.
Storage
• Do not store in damp conditions (such as in
a bathroom) and do not transport with any
damp items.
• When storing and transporting, protect from
prolonged direct sunlight.
• The atomiser set parts can be safely stored
in the storage bag. Store the device in a dry
place, ideally in the original packaging.
10. REPLACEMENT PARTS
AND WEARING PARTS
Atomiser set parts and replacement parts are
available from the corresponding service address
(according to the service address list). Please
state the corresponding order number.
Designation
IH 24 Kids/26 Kids
atomiser set = year
pack contains:
Mouthpiece
Silicone children's
mask
Silicone baby mask
Atomiser
Compressed air hose
Filter
Material REF
601.19
PP/silicone
Silicone/PP
Silicone/PP
PP/silicone
PVC
PU
Designation
Standard IH 26
atomiser set = year
pack contains:
Mouthpiece
Nosepiece
Adult mask
Children's mask
Atomiser
Compressed air hose
Filter
Nasal douche
Baby mask
Note
If the device is not used according to the
instructions specified, perfect functionality cannot
be guaranteed! We reserve the right to make
technical changes to improve and develop the
product. This device and its atomiser set comply
with the European standards
EN 60601-1 and EN 60601-1-2 (CISPR 11,
IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-2,
IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5,
IEC 61000-4-6, IEC 61000-4-7, IEC 61000-4-8,
IEC 61000-4-11) as well as EN ISO 27427 and
are subject to particular precautions with regard
to electromagnetic compatibility. Please note
that portable and mobile HF communication
systems may interfere with this device. For more
details, please contact our Customer Services at
the address indicated. The device complies with
the Regulation (EU) 2017/745 of the European
Parliament and of the Council on medical devices,
as well as the respective national provisions.
NOTES ON ELECTROMAGNETIC
COMPATIBILITY
• The device is suitable for use in all
environments listed in these instructions for
use, including domestic environments.
• The use of the device may be limited in the
presence of electromagnetic disturbances.
This could result in issues such as the failure
of the device.
• Avoid using this device directly next to other
devices or stacked on top of other devices, as
this could lead to faulty operation. If, however,
it is necessary to use the device in the manner
stated, this device as well as the other devices
must be monitored to ensure they are working
properly.
24
Material REF
601.28
PP/silicone
PP/silicone
PVC/aluminium
PVC/aluminium
PP/silicone
PVC
PU
PP 601.37
PVC 601.31