2. Signs and symbols ..........2 With kind regards, 3. Warnings and safety notes ........3 Your Beurer team 4. Description of the device and accessories ... 5 5. Initial use..............5 Application area 6.
• If you have health concerns of any kind, consult your Note Note on important information. The following symbols are used on the packaging and on • Please note the general hygiene measures when using the type plate for the device and accessories. the atomiser.
Page 4
Beurer atomisers and with the appropriate • This device is not intended for commercial or clinical Beurer accessories. The use of atomisers and acces- use; it is designed exclusively for self-treatment in a sories made by other companies may result in less private home.
Repairs Overview of atomiser and accessories Note • Under no circumstances should you open or repair the device yourself, as faultless functionality can no longer be guaranteed thereafter. Failure to comply will result in voiding of the warranty. • The device is maintenance-free. •...
The baby mask is not included in delivery with the • Please observe the notes on changing the filter in IH 58. You can find an overview of all replacement items these instructions for use. in chapter “12. Replacement parts and wearing parts”.
If you are using the adult mask [11], you can secure it 6.6 Stopping inhalation to your head with the adult mask strap. There is also a Once the mist is only coming out in an irregular flow or strap for the children’s mask [12]. if the sound changes when inhaling, you can stop the When using a mask to inhale, take care to ensure the treatment.
2. Re-insert the filter cap [4] with a new filter. Cleaning 3. Ensure that it is securely in place. Important 8. Cleaning and disinfection The device must be switched off, disconnected from the mains and allowed to cool down each time before Atomiser and accessories cleaning.
Disinfection which can have a negative effect on the efficiency of the treatment. We therefore recommend that you replace Please carefully observe the points below when disin- the atomiser and other accessories after a year. fecting your atomiser and accessories. We recommend •...
Problem/ Possible cause/remedy Problem/ Possible cause/remedy question question The atomiser 4. Unsuitable medication fluid added Why should There are two reasons for this: produces no for nebulisation (e.g. too viscous). the atomiser 1. To ensure a therapeutically effec- or too little The medication fluid should be pre- be replaced tive particle spectrum, the nozzle...
12. Replacement parts and wearing Storage and Temperature: -20 °C to +60 °C parts transportation Relative humidity: 10% to 95% conditions Ambient pressure: 700 to 1060 hPa Designation Material Aerosol properties 1) Aerosol delivery: 0.15 ml Year pack contains: 602.15 2) Aerosol delivery rate: 0.03 ml/min Mouthpiece 3) Particle size (MMAD): 4.12 µm Nosepiece with comfort...
The buyer will then receive further information about the processing of the warranty claim, e.g. where they can send the product and what documentation is required. Beurer GmbH • Söflinger Str. 218 • 89077 Ulm, Germany www.beurer.com • www.beurer-healthguide.com...
Need help?
Do you have a question about the IH 58 and is the answer not in the manual?
Questions and answers