Alarm Input Event - HIKVISION DS-7600NI-I2 Series User Manual

8. Click Save.

13.1.6 Alarm Input Event

Set the handling action of an external sensor alarm.
Steps
1. Go to Event Center →
2. Select an alarm input name.
Note
For example, Local<-1 represents the alarm input number at the device rear panel is 1.
3. Edit Alarm Name.
4. Turn on Enable.
5. Set Quick Disarming. Quick disarming can disable the selected alarm linkage methods in a batch.
6. Set Alarm Type.
Note
Refer to the alarm source to correctly configure the alarm type.
N.O
When contacts are in natural and off-power state, if two contacts are off, then they can be
called normal open.
Network Video Recorder User Manual
→ Event Configuration → Alarm Input Event .
Figure 13-1 Configure Alarm Input
57