Configure Ddns - HIKVISION DS-7600NI-I2 Series User Manual

Note
Working mode is only available for certain models.
3. Configure network parameters.
- IPv4
DHCP
If the DHCP server is available, you can enable DHCP to automatically obtain an IP address
and other network settings from that server.
MTU
The maximum transmission unit (MTU) is the size of the largest network layer protocol
data unit that can be communicated in a single network transaction.
Auto Obtain DNS Server
If DHCP is enabled. You can check Auto Obtain DNS Server to obtain Preferred DNS Server
and Alternate DNS Server.
- IPv6
Router Advertisement
If the router in the network supports IPv6, it is recommended to use this mode as default.
Auto
If there is a DHCPv6 device in the network, it is recommended to use this mode
Manual Configuration
You shall use this mode if you are going to manually enter IPv6 parameters.
4. Click Save.

4.1.2 Configure DDNS

Dynamic domain name server (DDNS) maps dynamic user IP addresses to a fixed domain name
server.
Before You Start
Ensure you have registered DynDNS, PeanutHull, and NO-IP services with your ISP.
Steps
1. Go to System → System Settings → Network → Network → DDNS .
Network Video Recorder User Manual
7