6.1 Normal Event Alarm
6.1.1 Configure Motion Detection Alarms
Motion detection enables the device to detect the moving objects in the monitored area and
trigger alarms.
Steps
1. Go to System → Event → Normal Event → Motion Detection .
2. Select a camera.
3. Check Enable.
4. Set the motion detection area.
Full screen
Customized area Drag on the preview screen to draw the customized motion detection
5. Set Sensitivity (0-100). The sensitivity allows you to calibrate how readily movement triggers the
alarm. A higher value results in the more readily to triggers motion detection.
6. Set the arming schedule. Refer to Configure Arming Schedule .
7. Set linkage actions. Refer to Configure Linkage Actions .
6.1.2 Configure Video Loss Alarms
Video loss detection detects video loss of a channel and takes alarm response action(s).
Steps
1. Go to System → Event → Normal Event → Video Loss .
2. Select a camera.
3. Check Enable.
4. Set the arming schedule. Refer to Configure Arming Schedule .
5. Set linkage actions. Refer to Configure Linkage Actions .
6.1.3 Configure Video Tampering Alarms
Video tampering detection triggered an alarm when the camera lens is covered and takes alarm
response action(s).
Steps
1. Go to System → Event → Normal Event → Video Tampering .
2. Select a camera.
Network Video Recorder User Manual
Chapter 6 Event
Click to set the full-screen motion detection for the image.
area(s).
50