Table of Contents
Advertisement
6.1 Normal Event Alarm
6.1.1 Configure Motion Detection Alarms
Motion detection enables the device to detect the moving objects in the monitored area and
trigger alarms.
Steps
1. Go to System → Event → Normal Event → Motion Detection.
2. Select a camera.
3. Check Enable.
4. Set the motion detection area.
Full screen
Customized area
5. Set Sensitivity (0-100). The sensitivity allows you to calibrate how readily movement triggers
the alarm. A higher value results in the more readily to triggers motion detection.
6. Set the arming schedule. Refer to Configure Arming Schedule.
7. Set linkage actions. Refer to Configure Linkage Actions.
6.1.2 Configure Video Loss Alarms
Video loss detection detects video loss of a channel and takes alarm response action(s).
Steps
1. Go to System → Event → Normal Event → Video Loss.
2. Select a camera.
3. Check Enable.
4. Set the arming schedule. Refer to Configure Arming Schedule.
5. Set linkage actions. Refer to Configure Linkage Actions.
6.1.3 Configure Video Tampering Alarms
Video tampering detection triggered an alarm when the camera lens is covered and takes alarm
Network Video Recorder User Manual
Chapter 6 Event
Click to set the full-screen motion detection for the image.
Drag on the preview screen to draw the customized motion detection
area(s).
49
Advertisement
Table of Contents
