HIKVISION DS-7600NI-I2 Series User Manual page 38

Steps
1. Go to System → Device Access → Device → POS .
2. Click Add to add a POS device.
3. Set the POS device parameters.
POS Protocol
Universal Protocol
You can set the start line identifier, line break tag, and end line tag for the POS overlay
characters, and the case-sensitive property of the characters. You can also optionally check
the filtering identifier and the XML protocol.
EPSON
The fixed start and end line tag are used for EPSON protocol.
AVE
The fixed start and end line tag are used for AVE protocol. Serial port and virtual serial port
connection types are supported.
NUCLEUS
The fixed start and end line tag are used for AVE protocol. Serial port and virtual serial port
connection types are supported. The NUCLEUS protocol must be used in the RS-232
connection communication.
Connection Mode
TCP Connection
When using TCP connection, the port must be set from 1 to 65535, and the port for each
POS machine must be unique.
UDP Connection
Network Video Recorder User Manual
Figure 6-4 Add POS Device
21