HIKVISION DS-7600NI-I2 Series User Manual page 67

Event Name
Region Region entrance detection
Entrance detects objects that enter a
Detection predefined virtual region.
Region Exiting Region exiting detection
Detection detects objects that exit from
a predefined virtual region.
7. Click Arming Schedule to select an arming schedule type.
Note
If you set Arming Schedule as Custom, you can drag the cursor on time bar to set customized
arming schedule, or move the cursor on time bar and click
schedule.
8. Click Linkage Method to set linkage methods.
Linkage Method
Notify Surveillance
Center
Alarm Pop-Up Window
Buzzer
Send Email
Network Video Recorder User Manual
Event Description
Table 13-4 Linkage Method Description
The device can send an exception or alarm signal to the remote
alarm host when an event occurs. The alarm host refers to the PC
installed with client software (e.g., iVMS-4200, iVMS-5200).
When an alarm is triggered, the local monitor displays the alarm
pop-up window.
When an alarm is detected, the buzzer will make an audible beep.
The system can send an email with alarm information to a user or
users when an alarm is detected.
Rule Configuration
The higher the value is, the easier the
detection alarm can be triggered.
d. Optional: Select Detection Target as Human
or Vehicle to discard alarms which are not
triggered by human or vehicle.
e. Optional: Repeat the above steps to set
another one.
a. Select a rule number.
b. Use the tool bar at the top of image to draw
the detection area. If Max. Size or Min. Size
is configured, only targets that meet the
size requirement can trigger alarms.
c. Set Sensitivity. The higher the value is, the
easier the detection alarm can be triggered.
d. Optional: Select Detection Target as Human
or Vehicle to discard alarms which are not
triggered by human or vehicle.
e. Optional: Repeat the above steps to set
another one.
Description
50
to set specified time