Chapter 17 System Parameter Settings - HIKVISION DS-7600NI-I2 Series User Manual

Chapter 17 System Parameter Settings

System parameters include device name, time, lock screen time, language, etc.
Go to System → System Settings → System Configuration to configure parameter.
Type
Basic Info
Time
Configuration
Menu Output
Channel-Zero
RS-232
Network Video Recorder User Manual
Table 17-1 Parameter Description
Parameter Name
Lock Screen Time
Live View
Permission on
Lock Screen
Time Sync Mode
Auxiliary Port
Auto-Switch
-
Usage
The screen would be locked when the cursor is not
moving for the specified time.
After the screen is locked, the device would play the live
image of cameras that have this permission.
NTP Time Sync
Your device can connect to a network time protocol
(NTP) server to ensure that the system time is
accurate.
Manual Time Sync
Manually set the system time.
When two or more monitors are connected to rear
panel, one of the them may become the auxiliary output
that cannot enter main menu. Images at the auxiliary
output windows will be automatically switched to next
ones according to the interval.
Channel-zero, known as virtual channel, can show live
images of all channels of the device, which saves
bandwidth for transmission.
Console
After connecting it to PC with a convertor, PC can set
the device parameters.
Transparent Channel
It is directly connected to a serial device. PC can
remotely access the serial device through network.
70
Description