4.2.7 Configure Log Server
Logs can be uploaded to the log server for backup.
Steps
1. Go to System → CX → System Settings → Network → Platform Access → Log Server .
2. Turn on Enable.
3. Set Upload Time Interval, Server IP Address, and Port.
4. Click Test to check if parameters are valid.
5. Click Save.
4.3 Network Service Settings
4.3.1 Configure HTTP(S)
HTTP ((Hyper Text Transfer Protocol) and HTTPS (Hypertext Transfer Protocol Secure) ports are
used for remote access through web browser. HTTPS protocol enables encrypted transmission and
identity authentication, which improves the security of remote access.
Steps
1. Go to System → System Settings → Network → Network Service → TCP/IP .
2. Optional: Turn on HTTP or HTTPS.
3. View or edit Port of HTTP or HTTPS.
4. Set HTTP/HTTPS Authentication.
Authentication Type
Two authentication types are selectable, for security reasons, it is recommended to select
Digest as the authentication type.
Digest Algorithm
Digest algorithms are based on HTTP/HTTPS and are mainly used for the digest
authentication of user authentication.
5. Click Save.
4.3.2 Configure RTSP
RTSP (Real Time Streaming Protocol) is a network control protocol designed to control streaming
media servers. You can specifically secure the stream data of live view by setting the RTSP
authentication.
Steps
1. Go to System → System Settings → Network → Network Service → RTSP .
2. Set parameters.
Network Video Recorder User Manual
13