HIKVISION DS-7600NI-I2 Series User Manual page 76

4. Turn on Enable.
5. Click Rule Settings to set the rule.
Event Name
Audio Audio exception
Exception detection detects
Detection abnormal sounds in
the scene, such as a
sudden increase/
decrease in sound
intensity.
6. Click Arming Schedule to select an arming schedule type.
Note
If you set Arming Schedule as Custom, you can drag the cursor on time bar to set customized
arming schedule, or move the cursor on time bar and click
schedule.
7. Click Linkage Method to set linkage methods.
Linkage Method
Notify Surveillance
Center
Alarm Pop-Up Window
Buzzer
Send Email
Network Video Recorder User Manual
Table 13-11 Audio Analysis Event
Event Description
Table 13-12 Linkage Method Description
The device can send an exception or alarm signal to the remote
alarm host when an event occurs. The alarm host refers to the PC
installed with client software (e.g., iVMS-4200, iVMS-5200).
When an alarm is triggered, the local monitor displays the alarm
pop-up window.
When an alarm is detected, the buzzer will make an audible beep.
The system can send an email with alarm information to a user or
users when an alarm is detected.
Rule Configuration
Sudden Increase of Sound Intensity Detection
Detects a steep sound increase in the scene.
Sudden Decrease of Sound Intensity Detection
Detects a steep sound drop in the scene.
Sensitivity
The higher the value is, the easier the detection
alarm can be triggered.
Sound Intensity Threshold
It can filter the sound in the environment. The louder
the environment sound is, the higher the value
should be. Adjust it according to the environment.
Description
59
to set specified time