Before You Start
A camera for person check-in is properly connected.
●
Go to System → Smart Settings → Algorithm Configuration → Algorithm Management .
●
Allocate Target Recognition to at least one engine.
The list library for check-in comparison is properly configured. Refer to Add a List Library for
●
details.
Steps
1. Click Person Check-In .
2. Right click to display the menu at left side.
3. Click
.
4. Click Add.
5. Set Task.
One-Time
The task will be used for one time.
Repeat
The task will be used and repeated for several times.
6. Configure other parameters, including Task Name, Check-In Time, Recognition Channel, etc.
7. Click Confirm.
16.2.2 Search Check-In Records
After check-in tasks are configured, you can search the records by day or month.
Before You Start
Ensure check-in tasks are configured.
Steps
1. Go to Person Check-In .
2. Right click to display the menu at the left side.
Network Video Recorder User Manual
Figure 16-2 Add Check-In Task
68