Log Server Settings - HIKVISION HiLook NVR 104MH-D/4P User Manual

Network Video Recorder User Manual
NTP Server
IP address of the NTP server.
4. Click Apply.

6.2.5 Log Server Settings

Upload Logs to the Server
You can upload system logs to the server for backup.
Steps
1. Go to Configuration → Network → General → Log Server Settings.
Figure 6-7 Log Server Settings
2. Turn on Enable
3. Set Upload Time Interval, Server IP Address, and Port.
4. Optional: Click Test to test if parameters are valid.
5. Click Apply.
One-Way Authentication
You can install a CA certificate (from the server) to your device to authorize the server via web
browser. It would improve the log communication security.
Before You Start
● Download the CA certificate from the server.
● Ensure log server parameters are valid.
Steps
1. Go to Configuration → Network → Advanced Settings → Log Server Configuration.
44