Setting The Timer; Operation Without The Remote Control; Airflow Diverter - Telair DualClima 8400H Installation Manual And User's Manual

5.14 Setting the timer

1. Press the TIMER button on the remote con-
trol: the start time ON indicator is activated.
2. Use the +HOUR and –HOUR buttons to set
the start time.
EN 3. Press the TIMER button again: the stop time
OFF indicator is activated.
4. Use the +HOUR and –HOUR buttons to set
the stop time.
5. Press the TIMER button again.
6. When the settings have been made, press
SET.
To delete timer programming, press CLEAR.
Start and stop times can be programmed
in 10-minute intervals.
Starting and stopping occurs with a
10-minute tolerance in relation to the pro-
grammed time.

5.15 Operation without the remote control

1 1
In the event of loss or failure of the remote con-
trol, the air conditioner can be used by pressing
the "Reset" button hidden inside the hole
ref.1) between the words "AUTO" and "TEST".
The air conditioner will start in the automatic mode,
automatic fan mode, temperature setting 24 °C.
- 18 - DualClima 8400H - DualClima 8400HB - DualClima 8400HN - DualClima 12500H
Fig. 17
("Fig. 17"
Translation of the original instructions

5.16 Airflow diverter

There is a small hatch on the diffuser. Beneath it
there is a knob ("Fig. 18"
ened, lets you adjust the direction of air outflow
from the front and rear vents
1
Fig. 18
ref.1) that, once loos-
Rev.011