Please note that the colour of the wires according
to their use is:
• Blue wire: neutral
• Brown wire: live
• Yellow-green wire: earth connection
EN
Make sure that the power supply cable is not too
long, as it could obstruct the air vents.
4.5 Installing the diffuser and fixing the
air conditioner
Remove the two air intake filters from the diffuser
("Fig.
10").
Connect the ribbon cable from the diffuser display
to the connector of the ribbon cable from the air
conditioner circuit board
connector on this same cable remains unused.
- 12 -
DualClima 8400H - DualClima 8400HB - DualClima 8400HN - DualClima 12500H
Fig. 10
("Fig.
11"). The 2-pole
Translation of the original instructions
Fig. 11
Position the diffuser horizontally and, depending
on the thickness of the camper roof, overlap the
profile of the inlet vent
or more connecting frames
frames have an adhesive side to allow the first
one to stick to the diffuser and the following ones
to the ones below. The purpose of the frames is
to connect the diffuser inlet to the air conditioner
outlet.
("Fig. 12"
ref. 2) with two
("Fig. 12"
ref. 1). The
Rev.011