Remote Control Display; Diffuser Display - Telair DualClima 8400H Installation Manual And User's Manual

5.7 Remote control display

1. Automatic mode
2. Cool operating mode
3. Warm operating mode
4. Ventilation mode
EN
5. Timer: start time (only visible if the timer has
been activated)
6. Timer: stop time (only visible if the timer has
been activated)
7. System time
8. Temperature setting
9. Courtesy lights switch-on indicator
10. Fan speed setting indicator (when AUTO is
displayed the speed is automatically con-
trolled by the air conditioner)
11. Data transmission indicator
1
5
7
8
- 16 - DualClima 8400H - DualClima 8400HB - DualClima 8400HN - DualClima 12500H
2 3 4 11
10
Fig. 15
Translation of the original instructions

5.8 Diffuser display

The diffuser has a display which also incorporates
the remote control IR receiver.
POWER: When the air conditioner is powered by
the mains, the red "POWER" LED
comes on:
RUN: When the air conditioner is powered and
running, the "RUN" LED
on:
• when it is green it indicates the conditioner is
working in Cooling mode
• when it is red it indicates the conditioner is
working in Heating mode.
6
The "ventilation only" mode is not shown
on the display.
TEMPERATURE
normally indicate the ambient temperature detect-
ed by the air conditioner inside the camper.
When setting the desired temperature via the re-
mote control, the two digits show the set temper-
ature for about 30 seconds, then they revert to
showing the temperature inside the camper.
9
1 3 1 1
Fig. 16
("Fig. 16"
("Fig. 16" ref. 2) comes
("Fig. 16" ref. 3): The two figures
1 2
ref. 1)
Rev.011