Table of Contents
Advertisement
1
2
3
4
5
8
9
5.7
Remote control display
1
Automatic mode
2
Cold operation mode
3
Hot operation mode
4
Timer: start time (only visible if the timer
has been activated)
5
Timer: stop time (only visible if the timer
has been activated)
6
System time
7
Set temperature
8
Function not supported (light)
9
Set ventilation speed indicator (when the
AUTO message is displayed, speed is
automatically
managed
conditioner)
18
6
7
10
11
12
by
the
air
1
4
6
7
5.8
Diffuser Display
The diffuser has a display which also
incorporates the remote control IR receiver.
When the red Power light (Fig. 20 ref. A) is lit
on the display the air conditioner is powered
off 230 Vac line power.
When the green Run light (Fig. 20 ref. B) is
lit, the air conditioner is working in Cold
mode; if the red Run light is lit, the air
conditioner is working in Heating mode.
The two figures (Fig. 20 ref. C) normally refer
to the ambient temperature measured by the
air conditioner inside the camper.
During the required temperature setting
procedure with the remote control, the display
unit
will
show
temperature; after approximately 30 seconds
from the end of the selection procedure, the
14
2
3
9
the
currently
selected
19
5
8
Hide quick links:
Advertisement
Table of Contents
