Connecting The Power Lead; Installing The Diffuser - Telair 5400H Manual For Installation And User Manual

Cut the two sides of the connector duct (fig.
11) so that they do not protrude from the
tunnel edge.
Fold the two long sides of the connector duct
(fig. 12) so that they are horizontally in
contact with the horizontal surface of the
tunnel.
The resulting connection is shown in Fig.13.
4.4

Connecting the power lead

Connect the previously prepared cable of the
unit to the 230V AC power supply terminal
(Fig. 14).
Please note that the colour of the wires
according to their use is:
blue wire: neutral
brown wire: phase
yellow-green wire: earth
Check that the power lead is not excessively
long as it could obstruct the intake grilles.
4.5

Installing the diffuser

Remove the two adjustable airflow director
fins from the diffuser (fig. 15)
11