Table of Contents
Advertisement
12
Fig. Control panel:
1.
Ignition key;
12. Parking brake switch
2.
Emergency stop;
26. Speed selector;
5.
Forward/reverse lever;
2
5
01-06-2022
Operation – Driving
Operating the roller
26
Set speed selector (26) in high operation position.
Release the parking brake (12).
Check that the steering is working properly by turning the
steering wheel once to the right and once to the left while
the machine is stationary.
Carefully move the forward/reverse lever (5) forward or
backward. Depending on the desired direction of travel.
The speed increases as the lever is moved away from the
neutral position.
1
The speed should always be controlled by using
the
changing the engine speed.
Check while driving if the warning lights are on.
4812134740EN
The machine should never be controlled from
the ground. The operator should remain seated
at all times.
Make sure that the area in front of and behind
the machine is clear.
forward/reverse
Test the emergency stop by pressing the
emergency stop button (2) while the machine is
moving at slow speed. Brace yourself for a
sudden stop. The engine will be switched off
and the brakes activated.
Operation - Driving
lever,
and
never
by
63
Advertisement
Table of Contents
