Table of Contents
Advertisement
OSD Menu Controls
The projector has an OSD that lets you make image adjustments and change various settings.
Navigating the OSD
You can use the remote control cursor buttons or the buttons on the top of the projector to navigate and make
changes to the OSD. The following illustration shows the corresponding buttons on the projector.
1. To enter the OSD, press the MENU button.
2. There are three menus. Press the cursor ◄ /
► buttons to move through the menus.
3. Press the cursor / ▼ buttons to move up
and down in a menu.
4. Press the cursor ◄ / ► buttons to change
values for settings.
5. Press the MENU button to close the OSD or
leave a submenu. Press the EXIT button to
return to the previous menu.
Note:
Depending on the video source, not all items in the OSD are available. For example, the Horizontal/Vertical
Position items in the Computer menu can only be modified when connected to a PC. Items that are not
available cannot be accessed and are grayed out.
O
-S
N
CREEN
— 33 —
D
(OSD) M
ISPLAY
S
ENU
ETTINGS
Advertisement
Table of Contents
