Connecting Equipment; Connecting A Computer; Connecting A Video Device - Vivitek DU6693Z-WH User Manual

DU6693Z DLP Projector - User Manual

Connecting Equipment

Follow the instructions below to connect DU6693Z projector to the video source, external control equipment (if any). When
connecting to the equipment, use the correct signal cable to connect to the signal source and ensure that the cable is
securely connected. Fasten the nut on the joint and connect the signal source equipment to the projector according to the
figure below.

Connecting a Computer

You can connect the PC signal to be projected to the projector through the DVI-D, HDMI, DisplayPort, VGA or RGBHV
(BNC) cable. If the signal to be input is VGA signal, connect the VGA cable to the external display to simultaneously
monitor the projected content.

Connecting a Video Device

Connect a video equipment to the input port of the projector via the DVI-D, HDMI, DisplayPort and Component Video
Connector.
28
UM66931217EN00