Dmx Addressing - SHOWTEC Stellar FZ-1000 Fazer User Manual

Stellar FZ-1000 Fazer

DMX Addressing

In a setup with multiple devices, make sure that you set the DMX starting address of each device
correctly. The Stellar FZ-1000 Fazer has 1 personality: 2 channels.
If you want to connect multiple devices on one data link and use them in 2-channel mode, for example,
follow the steps below:
Set the starting address of the 1
02) Set the starting address of the 2
03) Set the starting address of the 3
04) Continue assigning the starting addresses of the remaining devices by adding each time 2 to the
previous number.
Make sure that you do not have any overlapping channels in order to control each Stellar FZ-1000 Fazer
correctly. If two or more devices are addressed similarly, they will work similarly.
Product code: 61114
device on the data link to 1 (001).
st
device on the data link to 3 (003), as 1 + 2 = 3.
nd
device on the data link to 5 (005) as 3 + 2 = 5.
rd
19
Fig. 07