SHOWTEC Stellar FZ-1000 Fazer User Manual page 9

Table of Contents

Advertisement

Stellar FZ-1000 Fazer
Attention
Power supply
Before connecting the device to the power supply, make sure that the current, voltage and
frequency match the input voltage, current and frequency specified on the information label on the
device.
Make sure that the cross-sectional area of the extension cords and power cables is sufficient for the
required power consumption of the device.
Attention
General safety
Do not operate the device without liquid.
Do not point the fog output at smooth floors. The fog output can cause condensation, which can
make the floor slippery.
Do not insert objects into the air vents.
Do not switch the device on and off in short intervals. This decreases the device's life.
Do not shake the device. Avoid brute force when installing or operating the device.
If the device is dropped or struck, disconnect the device from the electrical power supply
immediately.
If the device is exposed to extreme temperature variations (e.g. after transportation), do not switch it
on immediately. Let the device reach room temperature before switching it on, otherwise it may be
damaged by the formed condensation.
If the device fails to work properly, discontinue the use immediately.
Attention
For professional use only
This device shall be used only for the purposes it is designed for.
This device is designed to be used as a professional fog effect. Any incorrect use may lead to hazardous
situations and result in injuries and material damage.
This device is not suitable for households.
This device is not designed for permanent operation.
This device does not contain user-serviceable parts. Unauthorized modifications to the device will
render the warranty void. Such modifications may result in injuries and material damage.
Attention
Before each use, examine the device visually for any defects.
Make sure that:
The fluid tank is closed.
All screws used for installing the device or parts of the device are tightly fastened and are not
corroded.
The safety devices are not damaged.
There are no deformations on housings, fixations and installation points.
The power cables are not damaged and do not show any material fatigue.
Product code: 61114
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

61114

Table of Contents