Table of Contents
Advertisement
Stellar FZ-1000 Fazer
DMX Operation
To setup up the device, follow the steps below:
Fill the tank (Fluid Tank Capacity 4 L). See 6.3. Filling the Tank on pages 21–22 for more information.
Connect the DMX cables before supplying power to the device. See 5.3. DMX Connection on page
17 for more information.
Connect the power cable before supplying power to the device. See 4.5. Connecting to Power
Supply on page 16 for more information.
Set the ON/OFF switch (14) to ON.
Wait for the device to heat up. This will take a maximum of 3 minutes. When the device is not 100 %
heated you cannot view the menu or change the settings.
Set the DMX starting address of the device in Address menu. See 6.7.4.1. DMX Address on page 27
and 5.3.4. DMX Addressing on page 19 for more information.
Notes:
●
You cannot constantly fog @100% until the tank is empty.
In order to constantly fog, you have to adjust the output volume to 40%. Only then will the device
keep fogging until the tank is completely empty.
●
Manual operation with the control panel on the device always has priority over the remote control.
DMX Channels
2 CH
Function
1
Output
2
Fan Speed
Product code: 61114
Value
Setting
000–004
No function
005–255
Fog output 5-100%
000–255
Fan Speed 5-100%
29
Advertisement
Table of Contents
